1. How to connect the new device with App?
a. Please charge your new device at least 10 minutes or more before the first usage.
b. Long press the button 3-5 seconds.
c. Download App and register
Tips: System Requirements--Android5.0+ / iOS10.0+
d. Make sure the phone's Bluetooth is turned on, then open the app to connect the device.
Tips: Be sure not to directly use the Bluetooth of the mobile phone to connect the watch.
2. App cannot search the watch Bluetooth.
a. Make sure your phone's Bluetooth is turned on
b. Disconnect and ignore the Bluetooth connection between the watch and the phone in the mobile Bluetooth settings, because the app search will automatically block the devices
which Bluetooth connected.
3. Android phone will disconnect Bluetooth after App interface is turned off.
Android mobile phone system memory management will be forced to turn off the background app,you need to turn off the power saving mode or pull the app into the ayatem housekeeping green background inside,app will not be forced to close.app must be running in the background,bluetooth will not automatically disconnect.
4. Step and distance data not displayed or inaccurate.
To reduce errors, smart watch usually sets an initial value of 100, it will count steps when we walk more than 100 steps. The APP will show the real walking steps and start counting from step 100.
5. Call or message notification, weather display, watch face market, custom dials, etc.
a. Enter APP -- Me - My Device
b. Set the function reminders and related data you need.
6. Incorrect power display in App
The system sets the power display as 0%, 20%, 40%, 60%, 80% and 100%, 6 gear parameters.
7. Blood pressure & blood oxygen monitoring data deviation
The deviation between the measurement value of the watch and the sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is the radial artery, and the measurement site of the watch is the two main branches of the arteriole. Normally, the aortic blood pressure measurement and the arteriole blood pressure measurements will vary by three to forty. If you use a watch and a sphygmomanometer to measure at the same time, because the blood flows in the artery in the direction of the centrifuge, the sphygmomanometer measures the straps so that the lower part of your elbow is under pressure. Temporary blood cannot flow smoothly to the branch of the artery below, and the vascular tension is increased, which will make the upper and lower blood pressure measurement values more biased.
8. Languages support (varies a little on different models)
English, French, German, Japanese, Spanish, Italian, Korean, Russian, Thai, Czech, Portuguese, Indonesian, Arabic, Turkish, Greek, Estonian, Bulgarian, Latvian, Lithuanian, Romanian, Serbian, Slovak.